Leisure Centres

LeisureSentry Alarm System

A Trusted Wireless Pool Alarm System

To aPool alarmutomatically or manually summon assistance in an emergency situation in your spa, pool, gym or leisure centre.  Helping you to meet your Health and Safety obligations. LeisureSentry Alarm System includes:

  • Waterproof push buttons
  • Siren and flashing light available
  • Manager alert system
  • No contracts
  • Easy to install

The leisureSentry system is a wireless pool alarm designed to help protect leisure centre, gyms and spa staff and patrons as well as provide a means of raising a response within the centre.

How it Works…

A system comprises of one or more wireless transmitters carried or worn by lifeguards, or fixed wall buttons at poolside and gym locations which when activated, send an alarm signal back to a central receiver.

The central receiver is a wall mounted unit, featuring a number of indicators, a sounder and a reset button.  Upon receiving an alarm signal, the corresponding indicator illuminates, and the sounder starts.  The alarm is cancelled when the reset button on the receiver panel is pressed.  The receiver also comes with an option of onsite paging to give an instant alert to all managers as well as activating any number of siren/strobe units.

 

 

LeisureSentry Alarm System Technical Details

Leisure Centre Alarm

A. Waterproof Wall Transmitter

When the button is pressed, a signal is transmitted.  This unit is ideal for pool side locations where staff and members of the public may need to summon assistance

B. Lone Worker Transmitter

It can be carried in a pocket, or worn in the carrying pouch (supplied)  It features panic buttons which allow a worker to call for help, and it also features a tilt switch that automatically triggers the alarm should the worker collapse or be injured.  This unit is ideal for maintenance staff working around the site and in plant rooms.

C. Waterproof Wrist Transmitter

This is ideal for lifeguards on pool-side.  Fully waterproof, a single press of the panic button will ensure assistance is quickly on its way.

D. Waterproof Pendant Transmitter

Again, portable and waterproof, this unit is ideal for poolside and gym staff to summon assistance in the event of an emergency.

E. Pocket Pager

Worn by members of staff to alert them of any incidents instantly.  The message received is specific to the device that has been activated.

F. Central Receiver

The unit may be four, eight or twenty eight channels.  This means that is can support multiple numbers and types of devices (A-D).  The receiver will display the identity of the alarm that has been activated as well as sound to alert the attention of people close by.

The central receiver can also support external siren/strobe units

 

Please contact us for any more information about our trusted LeisureSentry Alarm System or to arrange a Site Survey.

 

Lone Worker Alarm Solution: WorkerSentry

Lone Worker Alarm

With over 30 years’ experience, we are proud to supply cost-effective, robust lone worker alarm solutions across the UK to large and small companies.

Our trusted Man Down alarm systems have been installed in warehouses, shopping centres, sports complexes and offices to protect lone working employees across England, Scotland, Wales and Northern Ireland

All-in-one, flexible Lone Working Alarm Solution includes:

  • Scalable lone worker solution includes a panic button (SOS), man down and reminder features
  • No SIM card or internet connection required
  • Robust, discrete pocket pager or wearable SOS fob/pendant with vibrate and/or bleep function
  • Easy-to-use with text message ID
  • No contract required or ongoing payments required
  • Multiple contact method available (telephone, pager or SMS)
  • Additional options to customise to your requirements include repeaters to extend the range of the system and remote siren strobes, designed to add a visual and audio warning to remote areas of the building.

Check out our lone working alarm equipment FAQs

The Lone Worker Protection System…

Our popular WorkerSentry system automatically or manually summons assistance as required in lone worker emergency situations.

It is designed to help protect your lone workers by providing a quick, easy-to-use means of raising an alarm within an organisation. This simple, robust system uses lone worker alarm transmitters, which when activated, send an alarm signal to a central receiver which is wall mounted.

The handy lone worker alarm transmitter can be carried in a pocket or worn in the carrying pouch (supplied). Ergonomic buttons enable the lone worker to easily call for help or the built-in fall detection which automatically triggers an alarm if the lone worker collapses or is injured.

Once the alarm is activated, it’s picked up by the wall-mounted central receiver (which has a number of indicators, a sounder and a reset button). Each transmitter has a different channel to identify which device’s alarm is sounding.  The alarm is cancelled when the reset button on the central receiver is pressed.

There are 2 other options available for raising the alarm onto designated remote third parties:

  1. If there isn’t anybody to pick up the alarm on-site we can connect an auto-dialler to the central receiver, via the outputs at the bottom of the panel. This then dials out to a list of pre-programmed phone numbers, with a pre-recorded message requesting assistance. FYI we can either integrate analogue or GSM diallers into the system. If we can locate the dialler near an ordinary analogue phone line (e.g. a fax line or domestic phone line), this will then ring out on the landline number of the premises. However, if there is no analogue line we can access, we can use the GSM dialler that runs off a sim card.
  2. Alternatively, if you would like to pick up the alarm remotely around the premises, we can have a paging module installed on the central panel. So, once an alarm has been triggered the panel will go into alarm as usual, however, it will then broadcast out another radio signal that will be received by a remote pager. This will then show a displayed message of the device/area that has been activated, via audio and vibrate function. This is good for members of staff being able to pick up the alarm wherever they are around the premises and to be instantly aware of the emergency.

 

Talk to us, the lone working protection solution experts, on 01280 845530 or via our contact form, and find out how we can help you to meet your Health and Safety obligations for your workforce.

 

Lone Working System Technical Details

Worker Sentry Lone Working Alarm System UK

A. Wall Transmitter

IP Rated.  When the button is pressed a signal is transmitted back to the central receiver.  The unit is battery powered: typical battery life is 3 – 5 years.  Ideal for locations where different people may be present, but who may need to summon assistance.

B. Lone Worker Alarm Transmitter

It can be carried in a pocket or worn in the carrying pouch (supplied).  It features panic buttons, which allow the lone worker to call for help, and it also features a tilt switch, which automatically triggers the alarm should the lone worker collapse or be injured.  The unit is battery powered; typical battery life is 3 – 5 years.

C. Pendant Transmitter

Again this unit is portable and waterproof.  This unit will raise the panic alarm when the single button is pressed.  Battery life is typically 3 – 5 years.

D. Pocket Pager

Worn by a member of staff to receive the panic alarm messages from the central receiver.  They feature an alphanumeric display with the audio or vibrate alert function

E. Central Receiver

The unit may be a four or eight-channel device.  This means it is capable of supporting a large number of different transmitters (Units A – D).  The unit also features an internal buzzer and can display which devices have been activated.  It can also support local onsite paging.

The central receiver can also support other equipment:

A siren/strobe can be connected to the system which is ideal for raising the alarm in a noisy environment.

An Autodialler is available for the system.  This device will dial a list of pre-programmed numbers alerting the users of a problem via a pre-recorded voice message.

Signal Repeaters – In large buildings there may be an area where signal penetration is poor.  The addition of a signal repeater can ensure we achieve 100% site coverage.

 

All equipment conforms to the UK licensing requirements & CE regulations.

Get in touch

Call today

01280 845530

Arrange a free site visit

Speak to James today. Quote web10 for 10% off first order.

Make Enquiry